Get Twisted Again. The Twisted Fury Solid introduces EnMotion-Xtra coverstock to the Fury Line.

Coverstock
EnMotion-Xtra improves over EnMotion coverstock by increasing traction in the oil and reaction off the dry. These qualities result in higher hook potentials, improved ability to handle heavy oil in the middle of the lane and greater ability to handle carry down.

Core
The Twisted Fury Solid uses the same successful Torsion Asymmetric Core used in the Twisted Fury. The Torsion Asymmetric is a medium RG core that helps push the Twisted Fury Solid through the heads, saving more ball reaction for the back-ends.

Reaction Characteristics
Out of the Box: With its 1000-grit wet sand finish, the Twisted Fury Solid will provide excellent mid-lane recovery and a strong continuous back-end reaction that matches up on medium to oily lane conditions.
If your Twisted Fury goes too long:. Dull the surface with 400-grit abrasive to get the Twisted Fury Solid to roll sooner and increase its hooking action.
If your Twisted Fury hooks too early: Polish your Twisted Fury Solid with Brunswick’s Factory Finish Rough Buff. If your Twisted Fury Solid still hooks too early, polish with Brunswick’s Factory Finish High Gloss Polish.

Coverstock
EnMotion-Xtra Reactive
3-Color Solid
Red / Black / Grey
Hardness: 76-77
Factory Finish
1000-Grit Wet Sand
Core Dynamics @ 16#
Two-component
Asymmetrical Core
RG max: 2.548
RG int: 2.525
RG min: 2.512
RG diff: 0.036
RG asy: 0.023
Average RG: 3.8
Performance
Hook Potential: 140
Length: 100
Typical Breakpoint
Shape: 75
Chart Position: Q10
Available Weights
12-16 Pounds