Powerhouse™ Particle Polish
Particle technology invaded the high-performance market. Unfortunately, polishing compounds abd systems did not keep pace. The particles are harder and more difficult to cut and shine than reactive coverstocks, requiring you to spend more time to produce a lower-friction surface texture. Until now. The fastest, most effective particle polish on the market lowers the labor cost associated with putting a shine on all particle coverstocks, regardless of manufacturer or particle composition.

• Quick, one-step process
• Takes 800-grit sand to a smooth polished surface
• Increases length for increased energy retention
• Removes lane oil and dirt
• Polishes ALL particle technology coverstocks

Powerhouse™ Sand Blaster
Combatting heavier oil conditions requires the ball to grip the lane sooner. The Sand Blaster compound is formulated with very aggressive cutting agents. These cutting agents add texture to the bowling ball’s surface for more “bite” on the lane and more hitting power in the pocket.

• Use on particle and reactive resin bowling balls
• Sands to 400-grit finish
• Removes lane oil and dirt
• Produces best results with: Faster ball speeds in medium to heavy oil Medium ball speeds in heavy oil
• Ball spinner not required

Powerhouse™ Matte Finish
Looking to restore that factory smooth, dull finish to your bowling ball? Matte Finish is the compound you need to smooth out the break point on cleaner backends.

• Use on particle and reactive resin bowling balls
• Restores factory reaction for 1000-grit and 15-micron sanded bowling balls
• Smoothes out the breakpoint on fresh backends and fresh lane oil patterns
• Produces best results with: Slower ball speeds in heavy oil Medium ball speeds in medium to heavy oil Faster ball speeds in medium oil

Powerhouse™ Factory Finish Polish
Nothing is more frustrating than hearing your customers complain that their resurfaced ball doesn’t react like it did when it was new. Ebonite has done extensive CATS testing research to identify the proper steps to restore the factory polished reaction and provide the most effective polishing compound to satisfy your customers.

• Quick, one-step process
• Takes 800-grit sand to original factory polish reaction
• Contains no silicones or waxes
• Mildly abrasive ball polish

Powerhouse™ Extender Ball Polish
Combating lighter to medium oil conditions requires the ball to retain energy longer to maximize entry angle and carry percentage. This medium abrasive polish contains aggressive cutting agents that will do the job quickly and effectively. Polishing with Extender will provide more length than original factory polishes.

• For use on all reactive coverstocks
• Micro-fine polishing compound
• Effective results in significantly less time than other polishing systems
• Removes all sanding lines from 800-grit sandpaper
• Provides long-lasting high luster and an ultra-smooth ball surface
• For maximum length and energy retention, use Factory Finish Polish after polishing with Extender

Powerhouse™ Ball Cleaner
Easy-to-use spray bottle dispenses a strong degreasing cleaner designed to deep clean dirt and oil from all coverstocks.

• Approved for use during ABC/WIBC competition
• Removes oil and dirt from ball’s surface
• For use on all polyester, urethane and reactive coverstocks

Powerhouse™ Energizer Ball Cleaner
Shock high-tech coverstocks back to life with Energizer Cleaner. Excellent finishing step after ball resurfacing and polishing. Removes performance-inhibiting materials from the ball's pores and particles.

• Approved for use during USBC competition
• Revives natural tack to ball surface for ultimate lane gripping power
• Increases hook potential
• Prolongs the consistency of the ball by reducing the amount of oil and dirt retained in the ball's surface
• Biodegradable, citrus-based strong degreasing formula
• Removes lane oil, dirt, blet marks, even tape residue
• Fast drying
• For use on all reactive resin and particle technology coverstocks